Rich Glitch is an experimental 8bit granular VCO that harnesses multiple controlled software glitches feeding back into each other to produce some wild sounds. The process starts with 2 separate 1v/oct granular audio signals that are each combined with a separate sub harmonic granular signal and fed into separate glitching engines which are fed back into each other depending on the “Cold Hard Cash” setting. A pitch compensation engine attempts to correct the error in pitch tracking caused by the glitches, but because the glitching is so extreme its efforts are mostly futile, in which case pitch tracking mostly ends up linear. Rich Glitch is highly random in its response to CV / parameter changes due
to the multiple glitches feeding into one another.

Price: $130 USD

Price: $130 USD

MINI GLITCH VCO

Price: $130 USD

Specifications:
8bit Grain table sound module
44khz internal sample rate
PWM Audio @ 76.5khz
FREQ/PW/WAVE: -5 .. +5v safe but effective range 0..5v
On board 5v regulator, only +12/-12v rails required
Current Draw Approx 40ma on +12v rail
8HP Dual Layer Acrylic Panel @ 3mm total thickness

Copyright © Beast-Tek. All rights reserved.

Mini Glitch is an experimental 8bit granular VCO that harnesses controlled software errors to produce its distinctive sound. The process starts with 1v/oct phase modulated grains that wave shaped and then fed through a single buffer
overflow algorithm which has real time control over the glitching produced. Finally a pitch compensation engine
attempts to correct the error in pitch tracking caused by the glitches, but it is physically impossible for pitch
to track perfectly at 1v/oct once glitching is underway. Mini Glitch is a lot more predictable in its control than
other Beast-Tek glitch VCOs

Specifications:
8bit Grain table sound module
44khz internal sample rate
PWM Audio @ 76.5khz
FREQ/PW/WAVE: -5 .. +5v safe but effective range 0..5v
On board 5v regulator, only +12/-12v rails required
Current Draw Approx 40ma on +12v rail
8HP Dual Layer Acrylic Panel @ 3mm total thickness

Hard Glitch is an experimental 8bit granular VCO that harnesses cascaded controlled software glitches in  combination with harsh wave shaping to produce some wild sounds. The process starts with 1v/oct FM grains that are fed through multiple software errors. A pitch compensation engine attempts to correct the error in pitch tracking caused by the glitches, but because the glitching is so extreme its efforts are mostly futile, in which case pitch tracking mostly ends up linear. Hard Glitch is highly random in its response to CV / parameter changes due to the multiple glitches feeding into one another. For a much more smoother, predictable response to parameter changes the Mini Glitch
is a better choice.

RICH GLITCH VCO​​

HARD GLITCH VCO

Specifications:
8bit Grain table sound module
39khz internal sample rate
PWM Audio @ 76.5khz
FREQ/PW/WAVE: -5 .. +5v safe but effective range 0..5v
On board 5v regulator, only +12/-12v rails required
Current Draw Approx 40ma on +12v rail
8HP Dual Layer Acrylic Panel @ 3mm total thickness